SCUNTHORPE JOINER PROVIDING QUALITY AT A PRICE YOU CAN AFFORD
http://www.freefoam.com/ INSTALLATION GUIDE STAGE 1The first row of tiles are removed and stored carefully for replacing at the end of installation.The existing felt is then cut back by 75-150mm as this has usually perished. The existing guttering is removed followed by the removal of the fascia boards.This then exposes the existing soffits which have usually got an assortment of debris which has built up over the years. (birds nests, wasps nests and build up of dust etc)Once all debris is removed the soffits are then removed.STAGE 2Once all existing fascias soffits and guttering has been removed this exposes the rafter bottoms for inspection for decay and damage.Any decay or damage is then replaced or treated accordingly to recieve the new uPVC fascias and soffits.STAGE 3The new fascias and soffits are now fitted with stainless steel fixings as required to manufacturers guidelines.A continuous ventilation strip is then fitted to the top edge of the fascia to prevent any further moisture problems to your roofspace for the forseeable future.STAGE 4The new guttering and downpipes are now installed and checked to make sure the appropriate fall is acheived according to your roof dimensions/requirements.STAGE 5Your installation is nearly complete , the new roof felt is now fitted to the first row of tiles and an eaves comb filler (birdguard) may be fitted as required depending on rooftile type.The rooftiles are then refitted, your new fascias, soffits and gutters are then cleaned for that perfect finish.The soffits are then sealed to prevent anymore unwanted visitors (wasps etc.)STAGE 6Finally , all rubbish etc. is removed from your property ensuring it is left how it was found, leaving you with a transformed home with peace of mind for the future.